Battery Management System (BMS) – 13S 48V 40A – Small, with Switch

$49.95

1 in stock

BMS BATTERY MANAGEMENT SYSTEM 52V (FOR48V BATTERY) 40A WITH ON/OFF SWITCH

PROTECT your expensive lithium battery cells with a quality BMS

Ideal for use were space is limited and a small BMS is required,

BMS BATTERY MANAGEMENT SYSTEM 52V (FOR48V BATTERY) 40A WITH ON/OFF SWITCH

PROTECT your expensive lithium battery cells with a quality BMS

Ideal for use were space is limited and a smaller BMS is required,  35mm X 65mm X 10mm

1–Balance cable included.

2–With Power on/off switch

3–Can fit the Polly case or SM01 Battery case.

4–With Balance

5–Discharge current:40A

6–Max Charge current:5A

4–Specification:

 

Voltage  Balancing                    Voltage                            4.20±0.025V

Current  Balancing                    Current                            each cell   67±5mA

Static Current-each cell                                                    ≤100µA

Maximum Charge Current                                                 5A

Maximum Continuous Discharge Current                       40A

Charging Over Voltage Protection – each cell

Charging Over Voltage Protection Detecting                    4.250±0.025V

Charging Over Voltage Detecting Delay Time                   0.5S-2S

Charging Over Voltage Protection Release                       4.1±0.025V

 

Discharge Under Voltage Protection – each cell

Discharge Under Voltage Protection Detecting                 2.750±0.1V

Discharge Under Voltage Protection Delay Time               50mS – 200mS

Discharge Under Voltage Protection Release                    3.0±0.1V

 

Over Current Protection

Over Current Detection Voltage                                       100±25mV

Over Current Detection                                                     80±10A

Over Current Detection Delay Time                                   5mS – 60mS

Over Current Protection Release                            To disconnect load and recover automatically

 

Short Circuit Protection

Short Circuit Protection Delay Time                                200µs – 800µs

Short Circuit Protection Release                To remove the short circuit and recover automatically

Impedance   Protection Circuit(Mosfets)                       ≤20mΩ

Temperature Working Temperature                                -40°C – +70 °C

Storage Temperature                                                     -40°C – +125 °C

Weight.3 kg
Dimensions10 × 10 × 5 cm