Pedal Assist Sensor – Rapid Installation Type
For electric bicycles and similar applications. Detects when the rider is pedaling and sends a signal to the controller. Used for pedal assist.
CAN BE USED WITH A VARIETY OF MAGNETIC DISCS DEPENDING ON YOUR CENTRE BRACKET TYPE .DIFFERENT TYPES ARE AVAILABLE FROM OUR WEBSITE
If coupled with a two-part magnetic disc, it can be attached without having to disassemble the crank assembly, as it can be snapped directly over the axle.
- comes in 3pcs – sensor, and a 2-piece plastic adaptor, with a bolt
- mounts left side
- 600mm cable
- male, 3-pin Julet connector
- dimensions: 59.5mm x 45mm x 9mm
- voltage: 5v
Wiring:
- red: VCC
- black: GND
- white: signal
